AUTO G 35 MV 2 eliminated failures caused due to carbon deposits and copper corrosion in electrical switches

An automotive component manufacturing company in West India was using a general-purpose Lithium grease on the copper terminals of the switch. A switch consists of plastic and copper parts and the lubricant being used should be compatible with both the material. Prospect customer was facing the problem of residue formation, black deposits on the contact terminal along with copper corrosion during the test run.

The manufacturer reached out to Molygraph for a solution. Molygraph’s Automotive experts studied the application and environment criteria and recommended our specialty AUTO G 35 MV 2 grease.

• Application: Push Pull switches for commercial vehicles
• Initial Fill: 1.50 gm
• Test Requirements:
  • Plastic and copper compatibility
  • No residue formation on the contact terminal
  • To pass the test run for 50,000 cycles at 24 Volt and 15 Amps
  • Corrosion protection

AUTO G 35 MV 2

SYNTHETIC GREASES FOR PLASTIC TO PLASTIC COMPONENTS AND PRECISION BEARING

• Molygraph Auto G 35 MV 2 passed the tests with superior performance.
• There was no residue or corrosion on the copper terminal.
• Also, the switch action was very smooth with no noise.

AUTO G 35 MV 2

SYNTHETIC GREASES FOR PLASTIC TO PLASTIC COMPONENTS AND PRECISION BEARING

• Base Oil: PAO
• Base Oil Viscosity @ 40°C : 30-35 cSt
• Operating Temperature Range: -50 to +130°C
• Packaging: 20 Kg | 180 Kg

• Very high reliability of the functional switch.
• ZERO failures with smooth operation of electrical switches.
• Value for the OEM client and the Truck driver operating the switch.